Every surfer's dream boat!

In Santa Barbara, California two surfers set out to make rugged, dependable, lasting powerboats for commercial fisherman, and so Anderson Custom Boats was born. Santa Barbara surfers, Bill Anderson and Charlie Alexander, started Anderson Custom Boats in 1980. In the 1980’s and 1990’s Bill Anderson collaborated with another well-known surfer, named George Greenough on select custom boats. In general, the Anderson Boats were designed to meet the needs of the new booming Sea Urchin fishery: able to carry over 5,000 pounds of product at speeds of 20 knots and over! Boat owners who surf have appreciated having a boat built by one… and, in this case, two of their own.

Building this ultra-seaworthy vessel began in 1992 in the Anderson Custom Boat Yard in Santa Barbara, California. The boat was first launched in 1995, and the equipment is 1995 or newer. Many of the design features and the quality of construction are quite typical of Anderson’s boats. That is, the boat is very suitable for commercial or hardcore sport applications. Additionally, the George Greenough bow design includes an extra lip around the deck area that makes for a very dry ride. This 21 x 8 Custom Anderson Greenough is nothing less than the ultimate and the classic surfer’s boat. Check it out!

Accommodations: Overnight accommodations are provided for two people in two side-by-side bunks or one large V-berth. The cabin includes forward cuddy cabin followed by California-style semi-enclosed pilothouse. The cuddy cabin is equipped with sunlight opening hatch, two windows, vinyl covered cushions, fabric headliner, two 12-volt light fixtures, three cubby shelves, access to electrical panel, two under-berth watertight storage compartments, and lockable companionway door leading aft to pilothouse. The semi-enclosed pilothouse is equipped with five windows, full instrumentation helm, two new in 2007 Todd swivel seats, two under-seat storage compartments, stainless steel captain’s footrest, anti-fatigue mats, large stainless steel grab rail, 12-volt light fixture, and open access aft to working cockpit. The Todd swivel seats, seat platforms, storage compartments, and captain’s footrest are recent additions professionally designed and built by Anderson Custom Boats.

Galley Equipment: Galley equipment, stowed in deck fishhold, includes charcoal barbeque, case for barbeque, and pots/pans kit.

Electronic and Navigational Gear: The helm is equipped with forward/reverse throttle set, sport steering wheel, three windshield wipers, Boat Leveler trim tab control switches, dash/overhead mounted electronics, and dash mounted gauges. Gauges include RPM, oil, VAC, temperature, and volt. Electronic and navigational gear includes Furuno GP-1600 GPS plotter, Furuno 1721 radar with closed array, Furuno FCV-665 color video sounder fishfinder, Standard Horizon OMNI VHF marine radio, Ritchie compass, TV antenna, and USCG standard running lights.

Electrical/Gas/Plumbing: The boat is equipped with 12-volt electrical system. Electrical features include two marine batteries, alternator charging system, accessory panel, and battery isolator switch.

Water system includes both automatic and manual bilge pumps.

Hull and Deck Gear: The hull design is modified vee, suitable for West Coast sea conditions, and enables the boat to stay on a plane and maintain a high speed in both forward sea and following sea conditions. This is the notable design of choice among commercial fisherman from Southern California to the Pacific Northwest. Construction is hand-laid fiberglass hull, hand-laid fiberglass decks, and non-skid deck surfacing. Deck layout includes deck at bow, narrow walk around side decks, large working cockpit, raised aft deck over engine compartment, and aft deck walk around aisles to transom. Hull and deck features include rubber rub rail, two stainless steel foredeck grab bars, four stainless steel deck cleats, radar mast, four stainless steel grab rails over cabin top, two halogen deck lights, wash down decks, four scuppers, raised gunwales, spare ground tackle, saltwater hot water return (great for prepping wetsuits), and two new stainless steel aft deck rails (designed/installed by Bill Anderson). Anchor gear includes anchor, chain, rode, stainless steel bow roller, stainless steel t-bar tie down, and anchor locker. Safety gear includes fire extinguisher, first aid kit, docking line, and fender. Canvas inventory includes pilothouse backdrop enclosure with two eisenglass windows. Fishing and sports gear includes swim platform, in-deck fishhold, davit, hand-crank davit pulley, davit receiver built-in deck, four flush mount stainless steel rod holders, and nine stainless steel rocket launchers.

Equipment/Engine Details: Trailer package includes 1993 two-axle galvanized painted Trailrite trailer. Trailer features include lights, new disc brakes on two axles, hand-crank trailer stand, hand-crank bow winch, safety chain, spare tire, and four carpeted bunks. The trailer weighs 1,159 lbs. Combined towing weight of boat and trailer are 4,359 lbs.

Engine Details: The power package includes 1995 220 HP V6 Volvo Penta gas I/O with 650 hours. The boat cruises at 21 knots and reaches a maximum speed of 26 knots. Other engine features include two stainless steel fuel tanks with total capacity of 80 gallons, two in-deck fuel fill inlets, DP CD TRIM outdrive, stainless steel counter-rotating/even torque three-blade duo props, stainless steel hydraulic trim tabs, wall mounted oil-changing pump, and spare thermostat.

Auxiliary power is provided by Yamaha four-stroke outboard kicker motor. Auxiliary motor features include gas can hose mounted inside engine compartment and motor mount at transom.

One of the safety features of Anderson boats includes the sealed engine compartment. The engine compartment has transom shelf for batteries, overhead 12-volt light fixture, three forward vents, two aft vents, fiberglass access hatch, pole (for propping hatch open), and stainless steel handle.

Remarks: Owner is avid surfer who has enjoyed the boat for diving, surfing, and fishing in and around the Channel Islands.

Contact Information

Ocean Pacific Yacht Sales
Channel Islands Harbor Office
5349 Reef Way
Oxnard, CA 93035, USA

Tel (805) 382-7448
Fax (805) 382-7445
USA Toll-Free (800) 555-5897

Email: sales@opyachts.com

To directly contact listing agent click on “contact seller.”